Installing Epoxy Floor Coatings

Gaining knowledge of how to install a epoxy coating onto your garage floor is an easy process to learn when you have the correct construction materials and instructions. There are countless options available which include the standard gray to exotic applications that include concrete staining that have protective top coats.

One of the most important steps is to make sure that you prepare your garage floor surface before resurfacing. This means that you need to fill holes and fix cracks. The known leading factor to coating failures is the lack of surface prep done beforehand.

Of course etching your concrete floor is where you need to start. Here are a few ways to do this:

Acid etching is a typical way for many DIY floor applications when your need to resurface your garage floor. Before liquid acid was the recommended way, however over the years Gel Technology have combined acid with gel, so that it can be rolled on the garage concrete floor with ease. They are also easy and safe to use and ideal for garage floors. Not only that, but you can find acids that do not have any Volatile, Organic Compounds, or VOC’s, are soluble in the water and are safe for the environment. The gels present an even and consistent result that many are after. Liquid acids on the other hand can pose a problem as they are extremely diluted to begin. Because of this buyers are not aware that they are in fact buying water when they purchase liquid acid solution.

It is important that you fix any holes or cracks in the floor of your garage before commencing. If you have not prepared your garage floor surface properly beforehand you will soon experience unwanted moisture that will push itself up towards the surface causing your laid coating to chip and flake. Make sure that you fix any cracks with a suitable crack filler that should be thin enough so that it can fall to the bottom of the crack. Make sure that you also pay attention to any blemishes. Clean them of any loose materials and then apply a repair product.

Next you need to choose an epoxy coating for your garage floor. You should choose a product that is between 70% – 100% solid. If you purchase a epoxy kit from a shop you will soon find that once applied to your garage floor it will only look good that day, as they are generally weak. However high performance coatings are pretty easy to find, even if this is your first garage floor coating. If you have paid attention to cleaning and repairing your garage floor beforehand you will have a garage floor with a urethane top coat that lasts for many years. Also make sure that the epoxy your install can be cleaned easily and can handle hot tires.

There are countless tools available that can facilitate in measuring any moisture content that your garage floor is holding. One easy way to find this out is to simple put a rubber mat, or plastic on the floor. Do this in several spots, making sure to tape them down and leave for 3 to 4 days. If, when you come, you find moisture underneath that you will have what is called hydrostatic pressure. Once you have determined the moisture you can then simple buy a product known as the topical epoxy waterproofer. This can be rolled onto the floor, and then you can apply the epoxy coating.

When it comes to thinking about epoxy coating for your garage floor you should be weary of any low cost systems that are on the market. Even though the label says they can, they will not be able to handle hot tires or moisture. And even though they may give an excellent appearance when first put down, they soon go downhill after that.

How To Apply An Epoxy Floor Coating To Your Garage Floor

Although you may be ready to make a change to your garage floor, hiring a professional to do the job may not be in your budget. Applying an epoxy floor coating is one of the best ways to improve the aesthetics of the room while also adding resistance to tire tracks, oil and gasoline that can stain or damage concrete. Once applied, the finish will last a long time and give your floor a new shine that improves the looks and performance of the entire garage.

If you have decided to apply an epoxy floor coating to your garage floor as a do-it-yourself project, you will need to follow some fairly simple directions.

• Choosing the epoxy coating for your floor is the first and most important step. There are epoxy coatings that are water-based, solvent-based or 100% solids. Avoid those with the water-base as these are thin and often used only as the primer. New VOC regulations have led to most solvent-based coatings becoming non-compliant. The 100% solid epoxy coating is the best choice for creating a durable coating in a high-traffic area and it is often the product of choice for professionals who want the maximum benefits from their floor coating. You may also want to choose a coating with non-skid additives to give pedestrians more traction. Purchase the necessary application tools at the same time to ensure you get the right ones for the coating.

• The floor will have to be prepared prior to the application of the coating. While this step is the most time-consuming part of the process, it is essential for having a successful application. Concrete that is smooth will need to be acid washed or shot blasted to add texture to the surface. Although applying an acid wash is easier, the sot blasting process provides the best results. During the preparation of the floor, you will also need to replace any missing concrete and fill holes.

• Use the brush or roller you purchased with the epoxy to apply the coating to the concrete. Read the instructions beforehand to learn the curing time and the number of coats that you should use. Most applications require a minimum of two coats. Don’t rush the process and apply the second coat too quickly.

• Some people like to add a coat of urethane to provide added strength to their floor coating. However, many feel that the additional layers of epoxy floor coating are all that is needed to create the strong, resilient floor they want in their garage.

If your floor has already had severe damage to occur to the concrete, it is advisable to hire a professional to take care of the prep stage. Once the repairs have been made, you can still apply the epoxy floor coating yourself. Never apply the coating to a floor that has not been repaired or your time and money investment will likely result in floor failure. Following these steps and the instructions on the product you choose will result in the beautiful, resilient garage room floor that will last for many years.

Some Facts on Industrial Floor Coating

With the upward growth of concrete use in households and buildings, it can be deduced that the use for industrial floor coating has increased as well. It’s only natural as many now conceive that concrete and coatings come together more nicely than just concrete only. These days, you also consider the concrete coating when you think about the concrete for your home or building. This is only reasonable after seeing the aesthetic and durability results of having coated concrete. Isn’t it just nice to look at your concrete floor when it is so nicely textured ad patterned? Walls and countertops can also be significantly improved with the help of concrete coatings.

Many people are generally familiar with industrial floor coating. However, some facts have been mixed with some myths about floor coatings. Here are some points to straighten out what’s true and what’s not:

Coatings and Coloring Mixtures: No matter how they may seem like coatings, some products that enhance the appearance of concrete are not really considered as coatings. Chemical stains like acid stain, for example, is not exactly a coating. It is actually a coloring process that creates a chemical reaction with the concrete surface. There are a lot of other products that may be considered as floor coating to some people, but technically are not.

The Real Process of Coating Concrete: It is a general thought that coating would initially fail because, by its nature, it would bridge the porous surface of the concrete and trap the moisture present in the surface. You see, the moisture vapor should be allowed to escape. If not, there will be problems of blistering, peeling, and delamination, all of which contribute to concrete coating failures. Nowadays, though, there are products available that dismiss the initial thought. New elastomeric coatings are one of these products. It is the application of a thick elastic film that enhances the concrete surfaces and conceals cracks, patches, and other concrete problems.

Curing Period of 30 Days: Some coating products can be used after just seven days of curing. You’ll have to read the manufacturer’s instructions carefully and see if this applies to your coating product.

Concrete Block Fillers: Some people deem concrete block fillers unnecessary. But using the block fillers will enhance the concrete surface. It provides a stable foundation and fills up the pores and voids in the surface. With regards to block fillers that are heavy and difficult to apply, there are block fillers available nowadays that will save you some time and effort. These new block fillers also weigh less than the traditional ones.

These are only some of the issues that needs to be cleared up. These facts may not seem worthy of your time. But when it comes to choosing and applying coating on your concrete surfaces, these may help. The curing period of seven days and the new concrete block fillers, for example, can help in saving you some time while improving the quality and durability of your concrete. Facts like these can be helpful, even in just small ways, when you do the application for industrial floor coating.