Why We Use Industrial Floor Coating

Why is it that many buildings and homes opt to have their concrete floor coated? This is especially true for big and spacious buildings — offices, warehouses, schools, hospitals, etc. These establishments prefer to have floors that are sturdy and at the same time appealing to the eyes. This is where industrial floor coating comes in, to cover and protect the floor while at the same time making the floor look shiny and new.

A room becomes more attractive with a clean and shiny floor. The floor should not be overlooked when designing the office or room. As it covers the entire space of the room, it should be not be ignored when cleaning and cozying up the room. Industrial floor coating has really become an integral part in this regard.

Aside from the reason of aesthetics, industrial floor coating helps in keeping the floor compact and strong. It protects the concrete floor from the numerous people walking to and fro offices and rooms, and also from heavy equipment being dragged and set aside in a corner. Despite all the weight and the activity in the building, industrial floor coating will help keep the floor looking as if it was polished yesterday.

One of the popular floor coating being used today is the epoxy coating. Epoxy floor coating has the known purpose to improve the durability of the concrete floor. It also protects the floor from chemical spills and makes it slip-free. This is why it is popular among warehouses and factories where chemicals and heavy foot traffic is present. It is also inexpensive, and this reason makes it a great option for homeowners, too.

Another commonly used floor coating is acid stain. This coating is more popular for the decorative look it gives the floor rather than for adding strength and cover for the floor. Applying it on your own could be difficult because of the varying colors of the stain. It is recommended that a professional help with the coating to bring about perfect results.

As implied, industrial floor coatings come in different colors and finishes. People going for a unique and stylish look for their floor have many selections to choose from. There are also products nowadays that are featured as eco-friendly and safe for people. Floor coatings can also be either thick or thin. It all depends on the preference of the establishment or homeowner.

With the several manufacturers and sellers offering industrial floor coating products today, you will have no problem looking for protection for your concrete floor. There are also professionals around to help you in the application of the coating if you don’t know how to do it. This only shows how industrial floor coating has come to be popular among buildings and homes. Nowadays, having plain concrete floor is just not enough. As the floor receives the most workload out of all the planes of the building, the need to coat and protect it is not only unreasonable. It is also essential.

A Guide to Concrete Floor Coatings Selection

To select the best industrial concrete floor coatings for your facility, the first thing to c0onsider is the criteria to be used in your selection. Nearly all types of flooring requirements can be addressed by various industrial concrete floor coatings systems. Identify the requirements for your specific floors, which can be any of the following:

1. For repair and protection. Many floor coatings options cater to floor maintenance, repairing damaged surfaces, and offer protection from various types of floor abuses, such as chemical spills, abrasive impacts or physical loads, to name a few.

2. For quality performance and durability. Industrial concrete floor coatings contractors can install high-performance floors that last for long periods of time. The thickness of coatings used, plus the type of coating product applied, can vary the strength and durability of installed floor coatings systems.

3. For beautifying drab-looking floors. Industrial concrete floor coatings can transform floors in any areas of the facility — employee lounge, shop floors, loading bays, among others.

4. For cheaper and practical floor solutions. When you’re after a minimum amount of expenditure for your industrial floor project, this is possible with industrial concrete floor coatings that are less expensive but still perform well, fitting your budget and project requirements at the same time.

Concrete Coatings for Floor Repair

When signs of floor damage appear, facility managers should waste no time in replacing the industrial concrete floor coating system. Putting off the work will result to negative consequences such as:

1. Unsafe floorings that may lead to potential accidents for building occupants, due to uneven floors, low-friction or non-skid-resistant surfaces.

2. Dirty-looking floors despite constant cleaning.

3. Unhygienic floors that encourage the growth of harmful bacteria lodging in difficult-to-clean floor cracks.

4. Worsen floor damage as time goes by.

Epoxy-based fillers may be applied to level the holes and remove unevenness in surfaces. For deep cracks, sand or quart-mixed epoxy fillers will have to be used fill the bottom. For hairline cracks, sanding will remove coating unevenness and blend the edges to make banish the crack. In cases of large cracks, repairing the floor foundation is necessary before any coating system can be installed.

Concrete Coatings for Floor Make-Over

Industrial concrete floor coatings transform facility floors back to their original look. You can choose from any of the following, based on your unique requirements:

1. Glossy coatings. Clear epoxy gloss is standard choice for floor beautifications. The colorless formulation can hide tiny floor imperfections.

2. Satin coats. Shark-grips mixed in industrial concrete floor coating lend a rough texture to the floor, leaving the top coat with a satin sheen that hides minor damages, and makes for easy-to-clean and skid-resistant surfaces.

3. Colored chips. Multi-hued chips applied on still-wet top coats can enhance the look of floors. The chips are broadcasted in measured amounts and certain distances from each batch, or applied using a pail with holes in the bottom, to achieve the right chip density and appearance on the surface.

The choice of the most appropriate coating product has to be a careful balance of monetary considerations and practical or functional requirements.

When cost is the biggest factor in coatings selection, facility managers must remember to insist on quality and good performance. Cost-savings that sacrifice quality is useless, due to further repairs and rework needed in the future.

Reasons to Choose Epoxy Garage Floor Coating

It used to be difficult to find appropriate coating for your garage because products on the market were oil-based or latex paint, which cause paint lifting and peeling. As a result, it was difficult to maintain a clean garage floor. Even though, gloss paints clean up easily, it was slippery when it became wet and a danger to anyone who stepped on it. Therefore, some homeowners kept the concrete flooring to avoid the danger that these products cause. Today, homeowners can purchase epoxy garage floor coating, which provides better coverage for the floor without the problems of the past.

Epoxy is an ideal garage floor coating for oily and dirty garage whether commercial or residential. It withstands frequent tire movement without floor damage and is superior to other products on the market. It is durable, resistant and tolerates any type of automotive fluid. Cleaning your garage is easy when you use this product. Sweep the floor to remove dirt and debris and then mop the floor using warm soap and water regularly.

Epoxy floor coatings uses a chemically cured substance and is composed of two parts epoxy. Using one coating provides a beautiful gloss appearance that lasts a long time and is able to withstand extreme hot temperatures. It does not lift or peel due to the heat of hot tires like other floor coating product on the market.

Installing epoxy floor coating can be a little on the tricky side make sure you understand the manufactures instructions before you start. Clean the garage floor first because it requires a clean surface to help the substance adhere to the flooring. Give the floor a profile chemically or manually. Apply the coating with the recommended applicator. In roughly 8 to 12 hours, the floor will feel dry to touch. However, it takes at least 72 hours to dry completely, and to accommodate parking of your vehicle.